FlashRunner HS programs large memories such as eMMC and QSPI through the USB interface of NXP i.MX 8M Mini and Nano applications processors.
SMH Technologies has once again extended its range of supported devices, adding the ability to program eMMC through the USB interface of the i.MX 8M Mini and Nano microprocessors.
NXP’s i.MX 8M Mini/Nano family of applications processors offers cost-effective integration and affordable performance for smart, connected, low-power devices that need graphics, vision, voice control, intelligent sensing and general-purpose computing. With up to four Arm® Cortex®-A53 cores and one Cortex®-M4 core, the i.MX 8M Mini family can be used in a wide range of industrial and IoT applications. The i.MX 8M Nano family is pin- and application-compatible with it; the difference is that the Cortex®-M4 core is replaced by a Cortex®-M7.
How the programming flow works
FlashRunner HS ISP technology, together with the new USB active module (AM), supports the i.MX 8M Mini/Nano family in programming large memories connected to the processor’s USB interface. The approach is the same as the one used by the silicon vendor:
- Download an embedded application called u-boot into the RAM of the i.MX 8M Mini/Nano through the Serial Download Protocol (SDP) over USB.
- Run the application to switch to a simpler USB protocol, FastBoot.
- Communicate with it to program the target large memory, such as eMMC or QSPI memory.
The first step uses SDP and its variants (SDPS, SDPV, SDPU) to download the embedded application over USB. Because this is a USB HID protocol, the USB device can be accessed without installing operating-system-specific drivers.
As a first step into USB programming, the algorithm provides erase, program and verify functions for the content of the large memory that FlashRunner HS accesses through the i.MX 8M Mini/Nano microprocessor. For eMMC, it can handle the hardware and software partitions the customer has created in the device; additional commands are also provided to read information such as IVT file structures and partition sizes.
What it means for the production line
This programming flow ensures fast, stable programming with a short cycle time, which is especially important in high-volume production environments. The compatibility of FlashRunner HS ISP with the i.MX 8M Mini/Nano improves production line performance, lowers operating costs and shortens time to market for new products.
Looking ahead, thanks to its performance and wide range of applications, this programming flow is expected to be widely adopted in the market.