The .FRB format combines integrity checking and intellectual property protection with minimal overhead, shortening volume-production cycle times.
.FRB is a smart file format created by SMH Technologies and used by SMH programming systems to write firmware into microcontroller memory. It is one of the essential resources for programming ISP targets with a FlashRunner programming system during circuit board test and manufacturing.
What is an .FRB?
In ISP, one of the most important concepts is the firmware to be written into the ISP target device. The most common formats for this firmware are:
- Binary
- Intel Hex
- Motorola SREC
SMH programming systems support all of these formats, as well as proprietary formats from many silicon vendors, such as Infineon ahex, Renesas RPI and Texas Instruments txt. An FRB is the result of converting these source firmware files into SMH’s own format, which is then used throughout the programming flow.
Two optional features are available when working with FRBs:
- Encryption: protects the intellectual property in the customer’s firmware by turning the .FRB into a FlashRunner secure file (.FRS). Decryption takes place in real time when the program command is executed, with no impact on volume-production performance.
- Conversion report generation: makes what happened during conversion clearly visible. The report is a .txt file saved on your computer, where you can review the data blocks, their sizes, and the addresses at which the .FRB will be programmed.
Why use an .FRB?
Plenty of information about how the common formats above are structured is available online. For the purposes of this article, what matters is that the Binary format contains only the raw firmware data: it neither indicates the memory addresses where each part of the data should go, nor offers any protection for the stored data. Intel Hex and Motorola SREC, on the other hand, carry this kind of information and more.
This reveals two shortcomings:
- With today’s strong focus on information security, integrity checking and protection mechanisms in firmware are a basic requirement — and this is exactly what Binary files lack.
- With today’s strong focus on production line performance, Intel Hex and Motorola SREC mix a great deal of overhead in with the data that actually needs to be programmed, such as address information and record and data block sizes.
FRB combines the strengths of these formats into one that provides integrity checking and protection while keeping the overhead mixed in with the raw data to a minimum. As a result, when manufacturing circuit boards, SMH Technologies programming systems that program FRBs achieve the best balance between file protection and performance, in terms of both production time and production efficiency.