SMH Technologies
FlashRunner 2.0 NXG
Compact in-system programmer with 1 to 4 channels that fits straight into the fixture. Start with the single-channel model and upgrade to 4 channels in software later.

- 4independent parallel channels, upgradeable from 1
- 17.6 mmbody thickness, easy to fit in the fixture
- 32,000+supported devices from 90 vendors
Where it sits on the line
Test station / PCSends commands over LAN or USB
LAN / USB
FlashRunner 2.0 NXGIn the fixture, 1 to 4 channels
2 × DIN 48-pin
Target PCBA × 4One board on each channel
The thin body fits straight into the fixture, close to the boards being programmed; it can also run standalone through its control interface.
Specifications
| Programming channels | 1 to 4, independent and parallel (FRLAN2P0NXG-01CH to -04CH); upgradeable to 4 channels in software |
|---|---|
| Protocols | JTAG, SPI, I2C, BDM, UART and more |
| Signals per channel | 8 digital I/O lines with dedicated ground returns; 2 programmable output voltages |
| ISP connectors | 2 × 48-pin DIN connectors |
| Memory and storage | 1 GB on-board RAM; up to 256 GB storage, eMMC and NAND supported |
| Interface | Gigabit Ethernet (opto-isolated, auto-crossover), USB (opto-isolated) |
| Standalone operation | Dedicated fixture control interface (opto-isolated) |
| Enclosure | Aluminium, closed case or open frame |
| Dimensions | 142 × 70 × 17.6 mm |
| Supported devices | 32,000+ devices from 90 vendors |