SMH Technologies
FlashRunner 2.0
Parallel in-system programmer with 4 to 16 independent channels, compact enough to fit straight into the fixture; with a demultiplexer module the 16-channel model extends to 32 channels.

- 16independent channels programmed in parallel
- 256 GBstorage for large eMMC, NAND and other firmware
- 32,000+supported devices from 90 vendors
Where it sits on the line
Test station / PCSends commands over LAN or USB
LAN / USB
FlashRunner 2.0In the fixture, up to 16 channels
2 × DIN 48-pin
Target PCBA × 16One board on each channel
The programmer sits in the fixture and connects to the boards being programmed through two 48-pin DIN connectors; it can also run standalone through its control interface.
Specifications
| Programming channels | 4, 8, 12 or 16, independent and parallel; the 4-channel model can be upgraded to 8 channels in software, the 12-channel model to 16 |
|---|---|
| Channel expansion | The 16-channel model extends to 32 channels with a demultiplexer module (FR2P0MPX32), programmed in two passes |
| Protocols | JTAG, SPI, I2C, BDM, UART and more |
| Signals per channel | 8 digital I/O lines with dedicated ground returns; 2 programmable output voltages |
| ISP connectors | 2 × 48-pin DIN connectors |
| Memory and storage | 1 GB on-board RAM; up to 256 GB storage, eMMC and NAND supported |
| Interface | Gigabit Ethernet (opto-isolated, auto-crossover), USB-UART (opto-isolated) |
| Standalone operation | Dedicated fixture control interface (opto-isolated) |
| Dimensions | 170 × 83 × 19 mm without slave board; 170 × 83 × 30 mm with slave board |
| Supported devices | 32,000+ devices from 90 vendors |